Courses Search

Agricultural Chemicals Distribution Control

ACDC

This course includes training to safely prepare and apply chemicals, including (but not limited to) transporting, handling and storing chemicals, as well as identifying and controlling weeds to comply with legislative requirements.

AHCBIO203 Inspect and clean machinery for plant, animal and soil material

WS

This course includes training in identifying weeds and washdown requirements and carrying out wash down tasks.  Participants will learn about the obligations‚ documentation and reporting activities required, as well as how to appropriately wash down machinery, equipment, and vehicles.

AHCMOM216 Operate side by side utility vehicles

SBS

This course includes training to understand the functions of a side by side utility vehicles, as well as the correct maintenance and use of a side by side utility vehicles.

AHCMOM217 Operate quad bikes

QB

This course includes training to understand the functions of quad bikes, as well as the correct maintenance and use of quad bikes.

Combined 4WD

4WD

This course includes training to operate four wheel drive vehicles in a range of environments, as well as conducting routine maintenance as required.

CPCCLDG3001 Licence to perform dogging

DG

This course includes training to perform dogging, involving slinging techniques, selecting and inspecting lifting gear and directing of the crane operator in the movement of the load when the load is out of view of the crane operator.

CPCCLRG3001 Licence to perform rigging basic level

RB

This course provides training in performing basic rigging work, involving the movement of plant and equipment, steel erections, hoists (including mast climbing hoists), placement of pre-cast concrete, safety nets and static lines, perimeter safety screens and shutters; and cantilever crane loading platforms.

CPCCLRG3002 Licence to perform rigging intermediate level

RI

This course provides training in performing rigging work at intermediate level, which includes all the outcomes for rigging work at basic level, but also includes:
  • rigging of cranes
  • rigging of conveyors
  • rigging of dredges and excavators
  • rigging associated with tilt slabs
  • rigging associated with demolition work
  • dual lifts for licensing purposes

CPCCWHS1001 Prepare to work safely in the construction industry

White Card

This course includes the work health and safety induction training required prior to undertaking construction work, involving demonstrating personal awareness of health and safety legislative requirements in order to work safely and prevent injury or harm to self or others.

FWPCOT2254 Maintain chainsaws & FWPCOT2256 Trim and cut felled trees (level 1)

Chainsaw 1

FWPCOT2254 Maintain chainsaws and FWPCOT2256 Trim and cut felled trees . This course includes training to understand the various parts and functions of the chainsaw, as well as training to understand the correct use of the chainsaw and cleaning methods.

FWPCOT2254 Maintain chainsaws, FWPCOT2256 Trim and cut felled trees & FWPCOT2253 Fell trees manually

Chainsaw 2

FWPCOT2254 Maintain chainsaws, FWPCOT2256 Trim and cut felled trees and FWPCOT2253 Fell trees manually. This course includes training to understand the various parts and functions of the chainsaw, as well as training to understand the correct use of the chainsaw to trim and cut felled trees and to fell basic trees.

Health and Safety Representative

HSR

The course is intended to assist newly elected Health and Safety Representatives (HSRs) to understand their roles and functions under the WHS legislation influencing health and safety outcomes in their workplace.

Health and Safety Representative - REFRESHER

HSR-R

This interactive "HSR" training course approved by WorkSafe Qld includes relevant case studies and activities where HSRs can learn more about participating in workplace safety. The course is intended to refresh and update HSRs and deputy HSRs’ knowledge and skills necessary to fulfil their role as HSR.

HLTAID009 Provide cardiopulmonary resuscitation

CPR

This course includes training required to recognise and respond to an emergency situation and perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.

HLTAID011 Provide first aid

FA

This course covers the skills and knowledge required to recognised and respond to an emergency situation and provide first aid response to a casualty.

MSMWHS216 Operate breathing apparatus

BA

This course provides training in the safe operation and maintenance of breathing apparatus and equipment in an irrespirable atmosphere as defined by AS/NZS 1715:2009 Selection, use and maintenance of respiratory protective equipment.

MSMWHS217 Gas test atmospheres

GTA

This course includes training to test the working atmosphere, to determine if it is safe for the proposed work, involving the use of electronic test apparatus requiring the person to interpret readings and take action.

RIIHAN301E Operate elevating work platform

Scissor Lift

This course provides the training required to operate an elevating work platform under 11 metres.  If the boom length of the EWP extends beyond 11 metres a High Risk Work Licence is required to operate the EWP.

RIIHAN305D Operate a gantry or overhead crane

GC

This course provides the training required to operate a gantry or overhead crane.

RIIHAN307E Operate vehicle loading crane

RIIHAN307E

This course provides the training required to operate a vehicle loading crane with capacity less than 10 meter tonnes.

RIIHAN309F Conduct telescopic materials handler operations

TEL

This course provides the training required to conduct telescopic materials handler operations (telehandler).

RIIMPO315E Conduct tractor operations

TRAC

This course provides the training required to operate a tractor on civil construction worksites.

RIIMPO316E Conduct self propelled compactor operations

LC

This course provides the training required to operate a compactor on civil construction worksites.

RIIMPO317F Conduct roller operations

LR

This course provides the training required to operate a roller on civil construction worksites.

RIIMPO318F Conduct civil construction skid steer loader operations

LS

This course provides the training required to operate a skid steer on civil construction worksites.

RIIMPO319E Conduct backhoe/loader operations

LB

This course provides the training required to operate a backhoe/loader on civil construction worksites.

RIIMPO320F Conduct civil construction excavator operations

LE

This course provides the training required to conduct civil construction excavator operations.

RIIMPO321F Conduct civil construction wheeled front end loader operations

FEL

This course provides the training required to operate a wheeled front end loader on civil construction worksites.

RIIMPO322E Conduct civil construction tracked front end loader operations

TFEL

This course provides the training required to operate a tracked front end loader on civil construction worksites.

RIIMPO323E Conduct civil construction dozer operations

LZ

This course provides the training required to operate a dozer on civil construction worksites.

RIIMPO324F Conduct civil construction grader operations

LG

This course provides the training required to operate a grader on civil construction worksites.

RIIMPO325E Conduct civil construction scraper operations

LP

This course specifies the knowledge and skills required to competently perform scraper operations.

RIIWHS202E Enter and work in confined spaces

CS

This course provides training in the safe entry and completion of tasks while working in a confined space.

RIIWHS204E Work safely at heights

WAH

This course includes training for working at heights safely while understanding the associated hazards and appropriate risk management controls.

RIIWHS205E Control traffic with stop-slow bat

TC

This course provides training in controlling traffic with a stop-slow bat for a range of road conditions.

RIIWHS205E Control traffic with stop-slow bat - Renewal

TCR

This course provides training in controlling traffic with a stop-slow bat for a range of road conditions.

RIIWHS302E Implement traffic management plans

TMI

This course develops the skills and knowledge required to read and interpret traffic management plans, as well as installing/removing signs and devices in accordance with procedures set out in the Manual of Uniform Traffic Control Devices Part 3 (MUTCD).

Safe Work Near Exposed Live Parts

SWNELP

SWNELP includes the compliance with working safely up to the defined “safe approach distance” near energised electrical apparatus. This course is non-accredited.

Santos SWPP

SWPP

This course provides training in understanding the Santos permit system, knowing how the permit applies to workplace tasks, and understanding how to comply with the permit requirements.

TLID3035 Operate a boom type elevating work platform

TLID EWP

This course provides the training required to operate an elevating work platform under 11 metres.  If the boom length of the EWP extends beyond 11 metres a High Risk Work Licence is required to operate the EWP.

TLILIC0003 Licence to operate a forklift truck

LF

This course provides training in the safe operation of a forklift truck, including determining height and load capacity and shifting loads in a safe manner.

A forklift truck means a powered industrial truck equipped with a mast and an elevating load carriage.  A pair or fork arms, or other arms, can be attached to raise a load 900mm or more above the ground.  This does not include a pedestrian operated truck or a pallet truck.  

TLILIC0005 Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

WP

This course provides training in the safe operation of a boom-type elevating work platform (boom length 11 metres or more), involving the operation of a telescoping, hinged or articulated device to support a platform to elevate workers, equipment and materials.

TLILIC0018 Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)

CN

This course provides training in the safe operation of a non-slewing mobile crane with a capacity of more than 3 tonnes, incorporating a boom or jib that cannot be slewed.
A non-slewing mobile crane means a mobile crane incorporating a boom or jib that cannot be slewed, and includes:
  • An articulated mobile crane
  • Plant equipment with a side boom attached
  • Telehandler with a jib attached greater than 3 tonne capacity
This course does not include vehicle tow trucks.

TLILIC0020 Licence to operate a slewing mobile crane (over 100 tonnes)

C0

This course provides training in the safe operation of a slewing mobile crane with a capacity over 100 tonnes, incorporating a boom or jib that can be slewed.  This course does not include earth moving equipment configured for crane operations.

TLILIC0021 Licence to operate a slewing mobile crane (up to 100 tonnes)

C1

This course provides training in the safe operation of a slewing mobile crane with a capacity up to 100 tonnes, incorporating a boom or jib that can be slewed.  This course does not include earth moving equipment configured for crane operations.

TLILIC0022 Licence to operate a slewing mobile crane (up to 20 tonnes)

C2

This course provides training in the safe operation of a slewing mobile crane with a capacity up to 20 tonnes, incorporating a boom or jib that can be slewed.  This course does not include earth moving equipment configured for crane operations.

TLILIC0023 Licence to operate a slewing mobile crane (up to 60 tonnes)

C6

This course provides training in the safe operation of a slewing mobile crane with a capacity up to 60 tonnes, incorporating a boom or jib that can be slewed.  This course does not include earth moving equipment configured for crane operations.

TLILIC0024 Licence to operate vehicle loading crane (capacity 10 metre tonnes and above)

CV

This course provides training in the safe operation of a vehicle loading crane with a capacity of 10 metre tonnes or more.  A vehicle loading crane is a crane mounted on a vehicle for the purpose of loading and unloading the vehicle.

Traffic Management Implementation Refresher

TMIR

This course provides refresher training for reading, interpreting and implementing traffic management plans, as well as installing/removing signs and devices in accordance with procedures set out in the Manual of Uniform Traffic Control Devices Part 3 (MUTCD).

UETDRRF004 Perform rescue from a live LV panel

LVR

This course includes training required to perform rescue procedure from live low voltage (LV) apparatus, not including overhead lines and underground cable in the workplace.

Agricultural Chemicals Distribution Control

ACDC

Certificate III in Civil Construction - Road Construction and Maintenance

RII30920

The qualification RII30920 Certificate III in Civil Construction – Road Construction is designed for operators working in civil construction, including road construction, planning and carrying out civil construction tasks, and applying workplace health and safety.
 
This qualification provides training across 26 units of competency, including eight (8) core units, and 18 elective units.  Participants may select elective units that are relevant to their workplace and position.

Certificate III in Civil Construction - Pipe Laying

RII30920

The qualification RII30920 Certificate III in Civil Construction – Pipe Laying is designed for operators working in civil construction, including pipe laying, planning and carrying out civil construction tasks, and applying workplace health and safety.
 
This qualification provides training across 26 units of competency, including eight (8) core units, and 18 elective units.  Participants may select elective units that are relevant to their workplace and position.

Certificate III in Civil Construction Plant Operations

RII30815

The qualification RII30815 Certificate III in Civil Construction Plant Operations is designed for operators working in civil construction, including plant operations, planning and carrying out civil construction tasks, and applying workplace health and safety.
 
This qualification provides training across 19 units of competency, including 14 core units, and five (5) elective units.  Participants may select elective units that are relevant to their workplace and position.

Certificate III in Civil Construction Plant Operations

RII30820

The qualification RII30820 Certificate III in Civil Construction Plant Operations is designed for operators working in civil construction, including plant operations, planning and carrying out civil construction tasks, and applying workplace health and safety.
 
This qualification provides training across 20 units of competency, including 15 core units, and five (5) elective units.  Participants may select elective units that are relevant to their workplace and position.

Inspect and clean machinery for plant, animal and soil material

AHCBIO203

Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)

TLILIC0018

Licence to operate a slewing mobile crane (over 100 tonnes)

TLILIC0020

Licence to operate a slewing mobile crane (up to 100 tonnes)

TLILIC0021

Licence to operate a slewing mobile crane (up to 20 tonnes)

TLILIC0022

Licence to operate a slewing mobile crane (up to 60 tonnes)

TLILIC0023

Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)

TLILIC0024

Operate a light vehicle

RIIVHE201E

Operate vehicles in the field

PMASUP236

Perform rescue from a live LV panel

UETTDRRF004

Provide first aid

HLTAID011